isometric isometric title scale date dr dwg rev the information contained in this document is propr ietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by 200msp3t2b1m7qeh 2:1 9/4/2008 ST211120 a blr 1 1 panel mounting with standard locking ring without locking ring 8.13 [.320 in] 5.08 [.200 in] 25 ~ pos. 1 pos. 2 pos. 3 4.93 [.194 in] pos. 1 pos. 2 pos. 3 switch function off on on 2-3 open 2-1 a 18234 release for production 9/4/08 blr note: 1. all dimensions in mm [inch] 2. general tolerance: x.x=0.4 x.xx=0.25 3. terminal numbers for ref only 4. contact material: silver 5. rating: 3a @ 120vac or 28vdc 1a @ 250vac 6. life expectancy: 30,000 make-and-break cycles at full load. 7. insulation resistance: 1,000 mega-ohm min. 8. dielectric strength: 1,000 v rms @sea level. 9. operating temp.: -30c to 85c 10. 2002/95/ec (rohs) compliant 11. denotes critical parameter. 12. hardware to be shipped bulk t200015 - hexnut - qty 2 t200000 - lockwasher - qty 1 t200002 - lockring - qty 1 e-swtich logo on opposite side circuit: spdt 1 3 2 1 3 2 3 epoxy seal p.c. mounting 2.54 [.100 in] 5.08 [.200 in] n 1.09 [.043 in] 4.39 [.173 in] flat .76 [.030 in] 5.08 [.200 in] .51 [.020 in] 4.01 [.158 in] 5.59 [.220 in] .41 [.016 in] 5.08 [.200 in] 2.54 [.100 in] 3.30 [.130 in] 1 2 3 n 6.00 [.236 in] .51 [.020 in] 5.08 [.200 in] rating flat .41 [.016 in] .51 [.020 in] 10-48 uns-2a 4.55 [.179 in] r2.48 [.097 in] n 2.38 [.094 in] n 4.95 [.195 in] 6.10 [.240 in]
|